Product Description and Features
SANKEY MAXIMESH ® is a decorative expanded metal that combines strength with the traditional charm of delicate wrought iron work. With a small hole and sharp edges it is for perimeter barrier fencing in jails, and for security screens and gates.

• Two styles are available to suit individual needs
• Small holes and sharp edges
• Single piece of metal - cannot unravel or fray and cannot easily be broken

Common Uses of this product

• Secure enclosures, perimeter barrier fencing, security screens, gates, floor design, platforms, courtyard fencing, privacy screens, wind and hail break

Product Details

Schematic

SANKEY MAXIMESH® Type DVL	SANKEY MAXIMESH® Type RH

top

Specification

Cat No.	Std. Sheet Size (mm)		Thickness (mm)	Strand Width (mm)	Nominal Opening Size (mm)		Free Air Spac (%)	Mass (kg/m2)	Knuckle Width (mm)
	SWM	LWM			SWM	LWM
DVL3040	3000	1200	3.0	4	22	50	45-75	8.30	8.0
DVL3040/F	3000	1200	3.0	4	22	50	45-75	8.30	8.0
DVL3040	1200	2400	3.0	4	22	50	45-75	8.30	8.0
RH3030	2400	1200	3.0	3	12	19	38-54	12	6.0
RH3040	2400	1200	3.0	4	12	19	31-42	15	8.0

Installation Information
The following accessories are available to ensure easy fixing and proper finishing of your expanded metal project.

Clamping Methods
A galvanised steel fastening clamp set is available for "GM" and "GR" series SANKEY GRIDMESH® expanded metal. The clamp set consists of top and bottom plate and bolt. Note: All steel surfaces in contact with aluminium gridmesh should be painted with zinc chromate.

Method for "GM" and "GR" series.

Alternative method for all mesh types

Edge Trims

Cat. No.	Stock Length (mm)	Finish	Width "W" (mm)	Gap "G" (mm)	Thickness "T" (mm)	Mass per Length (kg)
LET2 LET2	3000 3000	Uncoated Galvabond	12 12	2.0 2.0	1.0 1.0	0.80 0.85
LET4 LET4	3000 3000	Uncoated Galvabond	19 19	4.0 4.0	1.2 1.2	1.18 1.20
LET6 LET6	3000 3000	Uncoated Galvabond	25 25	6.0 6.0	1.6 1.6	2.25 2.30
LET8 LET8	3000 3000	Uncoated Galvabond	25 25	8.0 8.0	1.6 1.6	2.59 2.65
LET10 LET10	3000 3000	Uncoated Galvabond	25 25	10 10	1.6 1.6	3.00 3.10
LET16 LET16	3000 3000	Uncoated Galvabond	30 30	16 16	3.0 3.0	4.80 4.90
LET22 LET22	3000 3000	Uncoated Galvabond	30 30	22 22	3.0 3.0	5.00 5.10

Seven steel edge beading sections (above) and standard steel angle sections suitable for use as expanded metal trims are available. In addition, special width trim sections can be manufactured against order.

FAQ's ABOUT THIS PRODUCT
What sheet sizes are SANKEY ® EXPANDED METALS available in?
Available in various sheet sizes depending on the particular mesh, the short way of the mesh (SWM) and the long way of the mesh (LWM) and the availability of stocks.

top